Connecting Power Cord - NEC Express5800/140Rc-4 User Manual

CONNECTING POWER CORD

Connect the provided power cord to the server.
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages 1-
3 to 1-8 for details.
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.
1.
Plug the provided power cord into the AC inlet on the rear of the server.
2.
Plug the other end of the power cord into the wall outlet.
3.
Secure the power cord with a lock spring.
Do not hold the power plug with a wet hand.
Do not plug the power cord in to an improper power source.
Do not connect the power cord to an outlet that has an illegal number of
connections.
Insert the power plug into the outlet as far as it goes.
Use the authorized power cord only.
Setting Up Your Server 3-33
WARNING
CAUTION