NEC Express5800/140Rc-4 User Manual page 91

Setting Up Your Server 3-19
17.
Install the other end of the cable arm on the arm bracket installed in step 16.
For the distance between the mount faces at the front and rear of the rack being 700 mm:
Fix the arm bracket with two screws D and two washers B at the position shown in the
figure below.
Arm bracket (900)
For the distance between the mount faces at the front and rear of the rack being 743 mm:
Fix the arm bracket with four screws D and four washers B at the position shown in the
figure below.
Arm bracket (900)