NEC Express5800/140Rc-4 User Manual page 122

4-12 Configuring Your Server
Primary IDE Master/Primary IDE Slave
Selecting "Primary IDE Master" or "Primary IDE Slave" on the Main menu shows the following
submenu.
See the following table for the items.
Option
Type
Cylinders
Heads
Sectors
Maximum
Capacity
Multi-Sector
Transfers
LBA Mode Control
32 Bit I/O
Parameter
[Auto]
None
CD-ROM
IDE Removable
ATAPI Removable
Other ATAPI User
1-2048
1-16
1-64
–
[Disabled]
2 Sectors
4 Sectors
8 Sectors
16 Sectors
[Disabled]
Enabled
[Disabled]
Enabled
Description
Set the IDE device to be the master.
The selection of "Auto" causes the
device to be detected automatically
during execution of POST.
"None" disables the connected device.
Indicates the number of cylinders
(display only). *1, *2
Indicates the number of read/write
heads (display only).
Indicates the number of sectors on
each track (display only).
Indicates the drive capacity (display
*2
only).
Indicates the status of multi-sector
transfer controlled by BIOS.
Indicates the status of the LBA
(Logical Block Access) controlled by
*3
BIOS.
Specify whether the 32-bit IDE data
transfer is enabled or disabled.
Your Setting
*1, *2
*1, *2
*3