NEC Express5800/140Rc-4 User Manual page 312

9-26 Upgrading Your Server
List of Optional Devices and their Available Slots
The following table shows the cards supported by this server and the available slots:
Product
N Code
name
N8103-65F SCSI controller
N8503-56F SCSI controller
N8103-81F Disk array controller*
N8104-103 1000BASE-T adapter*
N8104-111 100BASE-TX adapter*
N8104-86 100BASE-TX adapter*
√: Can be installed. –: Cannot be installed.
*1 Up to 4 cards can be installed.
*2 Up to 2 cards (up to 4 cards for AFT/ALB) can be installed.
Supports hot-plug feature.
*3 Supports hot-plug feature. Up to 5 cards can be installed.
*4 Up to 2 cards can be installed.
Onboard LAN Controller Considerations
It is impossible to configure the Teaming function of AFT(Adapter Fault Tolerance)/ALB (Adaptive
Load Balancing) in a standard network controller (on board LAN controller).
And it is also impossible to configure the Teaming function of the same AFT/ALB on a standard
network controller and an optional LAN board.
PCI
#1
32-bit/33 MHz
Profile
Voltage 5 V
Board size
Hot-plug Non-hot-plug
√
√
1
–
2
–
3
√
4
√
PCI-X
#2 #3 #4 #5
64-bit/100 MHz
Full-height
3.3 V
Long/Short
Hot-plug
√ √ √ √
√ √ √ √
–
√ √ √
–
√ √ √
√ √ √ √
√ √ √ √
#6 #7 #8
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √