Setting Up Your Server - NEC Express5800/140Rc-4 User Manual

Device with the serial
interface
(e.g., Management PC)
FRONT
Finally connect the provided
power cord to the receptacle.
If connecting the server to UPS,
see the explanation below.
REAR
Keyboard
Mouse
Device with the serial interface
(e.g., modem)
Direct connection to the private
telephone line is prohibited.
*1 To connect the external SCSI devices, change the baseboard cable connection.
*2 A leased line cannot be connected directly to this connector. The console of a management PC can be connected to
only serial port B. (BIOS setting required) Connect the console to only serial port B on either the front or rear panel.
To connect the rear side serial port B, change the baseboard cable connection with rear side serial cable that comes
with the server.
When an optional power
supply unit is additionally
installed
Device with the ICMB interface
A
1
Display unit
Device with USB interface
(e.g., terminal adapter)

Setting Up Your Server 3-25

Device with the USB Interface
(e.g., keyboard)
B
100BASE TX/
10BASE-T
1000BASE-T
100BASE TX/
10BASE-T
2
Printer with the
parallel interface
Device with the
*2
serial interface
*1
SCSI device
Hub
(multiport repeater)
Network system
on LAN
(connected
via a hub)