NEC Express5800/140Rc-4 User Manual page 120

4-10 Configuring Your Server
Option
System Time
System Date
Legacy Floppy A
Legacy Floppy B
Hard Disk Pre-Delay
Primary IDE
Master/Primary IDE
Slave
Language
Parameter
HH:MM:SS
MM/DD/YYYY
Disabled
1.2MB 5.25"
720Kb 3.5"
[1.44/1.25MB 3.5"]
2.88MB 3.5"
[Disabled]
1.2MB 5.25"
720Kb 3.5"
1.44/1.25MB 3.5"
2.88MB 3.5"
[Disabled]
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
30 seconds
–
English (US)
French
German
Spanish
Italian
Description
Set the time.
Set the date.
Set the settings of floppy disk
drive A (standard configuration).
Normally set to "1.44/1.25MB
3.5".
Set the settings of floppy disk
drive B.
Set to "Disabled" since the
server does not support drive B.
Set the waiting time in first
accessing to the IDE device
during POST.
Set the information on the device
connected to each channel on
the submenu. The settings of
some items may be changed.
However, leave the items as they
are at the shipment.
Select the language used for
SETUP.
Your Setting
[ ]: Factory-set