NEC Express5800/140Rc-4 User Manual page 124

4-14 Configuring Your Server
Advanced
The Advanced menu appears if you move the cursor to the position of "Advanced."
To display a submenu, position the cursor on a selection that has a submenu (preceded by symbol
and press Enter.
)
See the table below for the items.
Option Parameter
Boot-time [Disabled]
Diagnostic
Enabled
Screen
Reset [No]
Configuration
Yes
Data
NumLock On
[Off]
Memory/ [Boot]
Processor Error
Halt
Description
Specify whether the self-diagnosis (POST)
running screen is displayed or not on booting.
If this item is set to "Disabled," the "NEC" logo
appears during POST. (Pressing Esc in the
status causes the screen display to be switched
to the POST execution screen.
The Boot-time Diagnostic Screen is
automatically enabled if the Console
Redirection is enabled.
Select "Yes" to clear the extended system
configuration data area (system information
stored by POST). The parameter is changed
to "No" after the system is booted.
Specify whether the numlock is enabled or
disabled on booting.
Indicates whether POST is paused once at the
occurrence of a CPU or memory error during
the execution of POST.
When CPU error or Memory error is
encountered, the utility is not paused at the end
of POST if this item is set to "Halt" and even
though "POST Error Pause" of "Server" menu
is "Enabled".
Your Setting
[ ]: Factory-set