NEC Express5800/140Rc-4 User Manual page 132

4-22 Configuring Your Server
Option
Serial Port A
Base I/O Address
Interrupt
Serial Port B
Base I/O Address
Interrupt
Parallel Port
Mode
Base I/O Address
Interrupt
DMA channel
Legacy USB
Support
PS/2 Mouse
Parameter Description
Disabled Specify whether serial port A is
enabled or disabled.
[Enabled]
Auto
[3F8] Selects the base address and interrupt
(IRQ) for serial port A. These menus
2F8
are displayed if the Serial port A is
3E8
enabled.
2E8
IRQ 3
[IRQ 4]
Specify whether serial port B is
Disabled
enabled or disabled.
[Enabled]
Auto
3F8 Selects the base address and interrupt
(IRQ) for serial port B. These menus
[2F8]
are displayed if the Serial port B is
3E8
enabled.
2E8
[IRQ 3]
IRQ 4
Disabled Specify whether the parallel port is
enabled or disabled.
[Enabled]
Auto
Output Only Selects the parallel port operation
mode, base address, interrupt (IRQ),
Bi-directional
and DMA channel for the parallel port.
EPP
These menus are displayed if the
[ECC]
Parallel Port is enabled.
[378]
278
IRQ 5
[IRQ 7]
[DMA 1]
DMA 3
Specify whether the USB keyboard is
[Disabled]
made available in OS which does not
Enabled
support USB formally.
Disabled Specify whether the mouse is enabled
or disabled.
[Enabled]
Your Setting
[ ]: Factory-set