NOTE: The following items of BIOS setup information will be set as
shown below.
LAN Controller 1 (10/100): [Enabled]
Serial Port A:
Base I/O address:
Interrupt:
Serial Port B:
Base I/O address:
Interrupt:
Serial Port Address:
Baud Rate:
Flow Control:
Console Type:
Main Menu
Installing and Using Utilities 6-11
[Enabled]
[3F8]
[IRQ 4]
[Enabled]
[2F8]
[IRQ 3]
[On-board COM B]
[19.2k]
[CTS/RTS]
[PC ANSI]