Table of Contents
Advertisement
Hot Replace
Take the following procedure to execute the Hot Replace:
1.
Take the following steps to stop the device driver used by the Hot Plug PCI board you
want to replace:
IMPORTANT:
driver of the slot (containing the PCI board) from the operating system.
Failure to do so may cause the system to fail.
(1)
Open [Add/Remove Hardware] in [Control Panel].
The [Add/Remove Hardware Wizard] starts.
(2)
Click on [Next].
(3)
Select [Uninstall/Unplug a device] for hardware task, then click on [Next].
Before removing a PCI board, be sure to stop the
Upgrading Your Server 9-39
Advertisement
Table of Contents
Troubleshooting
