NEC Express5800/140Rc-4 User Manual page 218

6-22 Installing and Using Utilities
7.
Select the [Properties] command from the popup menu displayed by clicking the right
mouse button on the server name to display the [Properties] dialog box.
8.
If the [Properties] dialog box appears, provide the following setting:
<[ID] page>
Connection Type: LAN
<[Alert Notifications] page>
Remove the check of [Use Default Settings] and check the [RESET] of [Activate].
9.
Select the [Open Remote Console] command from the popup menu displayed by clicking
the right mouse button on the server name to start the [MWA Remote Console].
10.
Select the [Action at Remote Console Connect] command from the popup menu displayed
by clicking the right mouse button on the server window to display the [Action at
RomPilot Connect] dialog box. Then select [Go MWA mode].
11.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.
Insert the floppy disk storing the configuration information file into the floppy disk drive.