Connecting The Power Cord - NEC LS2400 Service & Reference Manual

Connecting the Power Cord

Plug the female end of the AC power cord into the input receptacle on
the rear of the power supply cage. Plug the male end of the power cord
into NEMA 5-15R outlet for 100-120 VAC or NEMA 6-15R outlet for
200-240 VAC.
If the power cord supplied with the system is not compatible with the
AC wall outlet in your region, obtain a suitable power cord that meets
the following criteria.
T
The power cord must be rated for the available AC voltage and have a
current rating that is at least 125% of the current rating of the
system.
T
The power cord connector that plugs into the wall outlet must be
terminated in a grounding-type male plug designed for use in your
region. It must have certification marks showing certification by an
agency acceptable in your region.
T
The power cord connector that plugs into the system must be an
IEC- type CEE-22 female connector.
T
The power cord must be less than 1.8 meters (6.0 feet) long.
Your system shipped with a power cord. Do not attempt to
modify or use the supplied AC power cord if it is not the exact
type required.
2-10 Setting Up the System
!
WARNING