Table of Contents
Advertisement
SPEECH AND SOUND CONTROL
When you release the button, the display will revert
to the normal status-displaying mode, but will also
indicate that a message is waiting. For example:
READY
(alternating)
READY
To check your own message, listen to it within one
minute from the end of recording (see Chapter 3 -
Message Playback). This way the MSG indication
will not be erased.
Message Playback
To listen to a message left by another user of the
system:
Click
and listen. PLAY will be displayed and
the message will be played back over the built-in
loudspeaker. When the playback ends, the display
will revert to the normal status-displaying mode. If
more than 1 minute elapsed after recording, the
MSG indication will disappear.
14
HH:MM
MSG
Chime ON/OFF
You can disable / enable the chime zones by
alternate clicking of the <8> key, as shown below:
PRESS
RESULTANT DISPLAY
CHIME ON
CHIME OFF
READY
CHIME indicator lights steadily when "chime on"
is selected.
↓
HH:MM
D-302213
Hide quick links:
Advertisement
Table of Contents
