MR816 CSX/MR816 X Hardware Setup window
From this window, you can make the settings related to the output signal of the headphone jacks, reverb (REV-X), master
levels, and routing. This window consists of four pages which can be called up via each of four tabs at the top of the win-
dow.
NOTE
· The settings made in the MR816 CSX/MR816 X Hardware Setup window will be saved as a project file of Cubase, with the exception of the
headphone's output level. This means that you can recall the previously-created settings as soon as you open the Project file the next time.
■ How to call up the window
Follow the instructions below.
For Cubase 4.5.1 or later
· Click "Headphone Setup" or "REV-X Setup" on the MR816 CSX/MR816 X Input Settings window (page 21).
· Select [Devices] ➝ [Audio Hardware Setup].
For Cubase AI 4.5.1 or later
· Select [Devices] ➝ [Audio Hardware Setup].
■ Parameter functions
When the Headphones tab is selected:
1
3
4
When the Reverb Routing tab is selected:
1
7
8
9
Dedicated windows for the MR816 CSX/MR816 X in Cubase
2
6
5
2
)
!
When the Master Levels tab is selected:
1
#
@
When the Settings tab is selected:
1
&
*
2
$
^
%
2
º
(
23
Operation Manual