Steinberg MR816CSX Operation Manual page 24

Dedicated windows for the MR816 CSX/MR816 X in Cubase
1 Headphones/Reverb Routing/Master Levels/Set-
tings tab
Calls up the desired page by clicking the respective tab.
On the Headphone page, you can make the settings
related to the headphones. On the Reverb Routing page,
you can set parameters such as effect type and return
level of the REV-X. On the Master Levels page, you can
adjust the master level. On the Settings page, you can
determine which jack is used for input/output of the digital
audio signal, or determine the channels to which the
Sweet Spot Morphing Channel Strip effect is inserted.
2 1/2/3 tab (only when two or more devices are
connected)
Determines the device to be controlled from among two or
three devices (MR816 CSX/MR816 X) which are con-
nected to a computer in daisy-chain
are available only when two or three devices are con-
nected.
3 Monitor source (Headphone jack 1)
Determines the source of the signal output from the head-
phone jack 1. When using Cubase 4.5.1 or later, you can
output the mix sound for monitoring by selecting the mix
created via the Control Room function as the monitor
source.
NOTE
· When using Cubase AI 4.5.1 or later, you can assign the moni-
tor source to the headphone jack by selecting one of the spe-
cific stereo output buses set in the VST Connection window.
4 Monitor volume (Headphone jack 1)
Determines the output level of headphone jack 1.
5 Monitor source (Headphone jack 2)
Determines the source of the signal output from head-
phone jack 2.
6 Monitor volume (Headphone jack 2)
Determines the output level of headphone jack 2.
NOTE
· When two or three devices (MR816 CSX/MR816 X) are con-
nected to a computer in daisy-chain fashion, the number is
assigned to the devices in the order they are recognized by the
computer. Each number assigned to each device corresponds
to the 1, 2, or 3 tab. For details, refer to page 43.
7 Reverb type
Determines the reverb type (Hall/Room/Plate) of the REV-
X.
8 Reverb time
Determines the reverb time of the REV-X.
9 Checkbox for selecting the channel whose the
signal is transferred to the REV-X
Determines the channel of the audio signal which is to be
transferred to the REV-X. You can select the channel by
clicking this field so that the checkmark is entered.
) Return Level settings
Indicates the Return Level settings from the REV-X for the
respective channels.
When using Cubase 4.5.1 or later and the Control Room
function is turned on, the Studio Channels are indicated
here. Also the monitor channel and phone channel are
indicated here if you have created them. When turning off
24
fashion. These tabs
Operation Manual
the Control Room function or using Cubase AI 4.5.1 or
later, only the output buses set in the VST Connection win-
dow are indicated here.
! Return Level
Determines the Return Level of the REV-X for each chan-
nel as output destination. Select the channel ( ) ) then
drag the dial icon to adjust the return level of the REV-X for
the selected channel.
@ Value of Master Level settings (analog output
jacks)
Indicates the Value of Master Level settings of the analog
output jacks for the respective channels. When using
Cubase 4.5.1 or later and the Control Room function is
turned on, the Studio Channels are indicated here. Also
the monitor channel and phone channel are indicated
here if you have created them. When turning off the Con-
trol Room function or using Cubase AI 4.5.1 or later, only
the output buses set in the VST Connection window are
indicated here.
# Master Level (analog output jacks)
Determines the Master Level of the analog output jacks
for each channel.
$ Value of Master Level settings (digital output
jacks)
Indicates the Value of Master Level settings of the digital
output jacks for the respective channels. When using
Cubase 4.5.1 or later and the Control Room function is
turned on, the Studio Channels are indicated here. Also
the monitor channel and phone channel are indicated
here if you have created them. When turning off the Con-
trol Room function or using Cubase AI 4.5.1 or later, only
the output buses set in the VST Connection window are
indicated here.
% Master Level (digital output jacks)
Determines the Master Level of the digital output jacks for
each channel.
^ [reset] button
Sets the master level of all currently displayed channels to
"0.00(dB)."
& Digital I/O, External FX
Determines which jack is used for input/output of the digi-
tal audio signal. For details, refer to "Digital I/O, External
FX" on page 31.
* Sweet Spot Morphing Ch. Strip
Determines the channels to which the Sweet Spot Mor-
phing Channel Strip effect is inserted. For details, refer to
"Sweet Spot Morphing Ch. Strip" on page 32.
( External FX Type (MR816 CSX only)
Determines how the MR816 CSX works as an external
effect unit for the DAW software. For details, refer to
"External FX Type (MR816 CSX only)" on page 32.
º Master Level Meter
Turning this checkbox on will assign the level meter func-
tion for the master output to the LED lamps around the
Multi Function Encoder knob.