Mr Editor; Main Window - Steinberg MR816CSX Operation Manual

MR Editor

The included MR Editor (see the "Getting Started" printed manual) gives you versatile tools for mixing the audio signal
inputs of the MR816 CSX/MR816 X.
IMPORTANT
The MR Editor is used when you use a DAW other than Cubase or you want to set the necessary settings for using the
MR816 CSX/MR816 X without connecting a computer. Note that Cubase and the MR Editor cannot be active simultaneously
because Cubase controls the mixing parameters of the MR816 CSX/MR816 X.
On the MR Editor, the mixing operation for each output can be performed by selecting the output at the right end in the main
window then setting the parameters such as volume and pan for each of 16 input channels in the Mixer section. For monitor-
ing the mixed sound, up to two outputs can be heard from the headphone jacks 1 and 2 simply by clicking the headphone
icon (page 14) after selecting the desired output.
The settings made on the MR Editor will be stored (overwritten) to internal memory in the MR816 CSX/MR816 X automati-
cally by executing the Scene Store operation, and will be maintained even if the power is turned off. Turning the power on
the next time will transfer the settings on the MR816 CSX/MR816 X to the MR Editor on the computer automatically. Even
when two or three MR816 CSX/MR816 Xs are connected to the computer in daisy-chain fashion, the MR Editor can control
them individually.
The MR Editor can be called up via the following operations.
Windows:
· Select [Start] ➝ [All Programs] ➝ [Steinberg MR] ➝ [MR Editor]
· From the driver icon indicated on the Taskbar Notification area, right-click this icon then select "MR Editor."
Macintosh:
· [Application] ➝ Double-click [MREditor]
The MR Editor consists of the Main window and Setup window. The explanations below cover the functions of these win-
dows.

■ Main window

The Main window lets you adjust various parameters such as mixing and internal effects (REV-X and Sweet Spot Morphing
Channel Strip) related parameters for the input signal from the external audio device and computer. The input signals mixed
with the controls in the center of the window are output from the output channels specified at the right of the window. Note
that the External Effect mode is available when using the MR Editor as well as Cubase. You can set the MR816 CSX/
MR816 X to the External Effect on the MR Editor.
To close the MR Editor window, click the [X] button at the top left corner.
Main window in the Normal mode:
Scene section
DEVICE
section
VIEW
section
SETUP
section
Input Mixer section
MR Editor
Output
section
Master/Headphone section
33
Operation Manual