Steinberg MR816CSX Operation Manual page 35

Scene section
Up to 20 mixer settings created on the MR Editor can be
stored as scenes and these 20 scenes (mixer settings)
can be saved as a single file to a computer. The current
scene or settings are applied to the MR816 CSX/MR816 X
in real time.
1 2
1 File icon
Click this to call up the menus: "Open," "Save" and
"Import Scene."
Open Opens an MR Editor file (extension: MRE).
Saves all the Scenes and current settings as an
Save
MR Editor file (extension: MRE).
Imports only the desired Scene from the speci-
fied MR Editor file (extension: MRE). From the
IMPORT SCENE window called up by selecting
this menu, select the desired file (at the file
icon ) and desired Scene as source in the
left column then select the destination Scene
number in the right column. Clicking [OK] at
right in the window will actually perform the
Import operation, while clicking [CANCEL] or
[X] will abort Import.
Import
Scene
Deletes all the scenes which have been stored
to the MR Editor. Click this menu to call up the
confirmation dialog then click [YES] to actually
Initialize delete all the scenes. When two or three
All Scenes MR816 CSX/MR816 Xs are connected in daisy-
chain fashion, all the scenes for the
MR816 CSX/MR816 X are specified at the
DEVICE section.
2 Scene name
Indicates the current Scene number and Scene name. If
you want to change the name of the current Scene, click
the Scene name then edit it. When the Scene 0 or a Scene
having no data is selected, clicking the Scene name calls
up the Scene list, meaning that the name cannot be
edited. If you want to call up a different Scene, click the
triangular pointer at the right of the Scene name to call up
the Scene list then select the desired Scene. Clicking the
selected Scene will change the current settings in the
Input Mixer section to the corresponding ones.
NOTE
· The Scene number 0 includes the default initial settings.
· The Scene named "---" contains no data.
· You can call up the Scene list also by clicking the triangular
indication at right of the Scene name box.
3 STORE
Click this to call up the STORE window. From this window,
the current mixer settings can be stored as a Scene. This
operation will also store the settings to internal memory of
the MR816 CSX/MR816 X.
3
Double-click the NAME box, edit the Scene name, select
the destination number then click [OK] to store the current
settings to the selected number as a Scene. Click [CAN-
CEL] or [X] at the left top corner to abort the Store opera-
tion.
NOTE
· Scene number 0 cannot be overwritten since it contains the ini-
tial default settings.
· When storing a Scene, only the settings for the specific device
specified in the DEVICE section will be stored. When two or
three MR816 CSX/MR816 Xs are connected, you will need to
store the settings for each device separately.
DEVICE section
This section lets you select the device for which the set-
tings will be edited. This section indicates icons of all the
connected MR816 CSX/MR816 X devices.
1 Device icon
Select the desired device icon from the ones indicated
here. The Multi Function Encoder knob lamps of the
MR816 CSX or MR816 X specified here will flash briefly.
NOTE
· For information about settings when daisy-chain connecting
two or three MR816 CSX/MR816 Xs and using them simulta-
neously, refer to page 43.
· If synchronization of the word clock fails when the Word Clock
Source is set to that other than "Internal," this device icon will
flash. If this occurs, confirm whether or not the Word Clock
Source setting is proper.
MR Editor
1
35
Operation Manual