Steinberg MR816CSX Operation Manual page 39

Master/Headphone section
This section lets you set the overall parameters such as
master volume level, the REV-X effect on/off and head-
phone related settings. The parameters here (except for
the headphone related settings) can be set for each out-
put which can be selected from the eight outputs at the
right end of the main window.
1 Master level meter
Indicates the master volume level for the current output
channel.
2 REV-X SEND
Determines whether or not the audio signals are sent to
the REV-X from the currently selected output channel.
Click this to turn the REV-X Send Level on or off. When this
icon is turned on, the audio signals will be sent to the
REV-X according to the balance specified by setting the
REV-X Send Level in the Input Mixer section. Note that this
icon is turned on only for the single output via last-selec-
tion priority.
NOTE
· The Return Level from the REV-X can be adjusted for each out-
put channel.
· Regarding the signal coming from the DAW, the REV-X Send
can be adjusted for each output channel.
3 REV-X Edit
Click this to call up the window for editing the parameters
of the REV-X effect. All of the parameters on this window
are the same as those in the window on Cubase. For
details, refer to page 25.
4 Reverb type
Selects the reverb type from "Hall," "Room" and "Plate."
This parameter can be set regardless of the currently
selected output channel.
1
2
3
4
6
5
7
8
9
!
)
5 TIME (Reverb time)
Adjusts the reverb time. This parameter can be set
regardless of the currently selected output channel.
6 RTN (Return Level)
Adjusts the return level from the REV-X effect for the cur-
rent output. This parameter can be set independently for
each output.
7 Master balance
This control adjusts the left and right volume balance of
the stereo overall sound of the current output.
8 Headphone setting
Click this so that you can hear the mixed sound of the cur-
rent output by using the headphones connected to the
headphone jacks of the MR816 CSX/MR816 X. The upper
icon corresponds to the headphone jack (
lower icon corresponds to the headphone jack (
can confirm which output sound can be heard via the
headphone icon ( / ) at the Output section at the
right end of the main window.
NOTE
· This setting cannot be stored as a Scene; however, it is saved
to the MR816 CSX/MR816 X automatically.
9 Headphone level
Adjusts the volume level for the headphone connected to
the headphone jack of the MR816 CSX/MR816 X.
NOTE
· This setting cannot be stored as a Scene; however, it is saved
to the MR816 CSX/MR816 X automatically.
) Master mute
Switches the mute status of the overall sound for the cur-
rent output.
! Master fader
Adjusts the overall volume level for the current output.
MR Editor
) 1 while the
) 2. You
39
Operation Manual