Steinberg MR816CSX Operation Manual page 37

This strip handles the audio signal
coming from the DAW software on
the computer. Note that audio sig-
nal coming from the DAW differs
DAW depending on the output channel
selected at the Output section. This
is because the output channel for
each track can be set on the mixer
window of Cubase.
3 +48V, PAD (MIC 1 – 8 only) and level meter
This section indicates information for the corresponding
input channel:
+48V: On/off status of phantom power (page 5).
PAD: On/off status of the PAD (page 5).
The level meter indicates the volume level in real time.
4 Phase
(MIC 1 – 8 only)
Click this to invert the phase of each channel's signal.
5 High Pass Filter
(MIC 1 – 8 only)
Click this to turn the High Pass Filter on or off. When the
High Pass Filter is turned on, signals below 80 Hz (which
are very low frequency components) are reduced.
6 Channel Strip Edit
(MR816 CSX only)
Click this to call up the window for editing the parameters
of the Sweet Spot Morphing Channel Strip effect. All of the
parameters on this window are the same as those of the
window (page 27) called up from Cubase, with the excep-
tion of the file icon and input channel setting (see below).
File icon Input channel setting
NOTE
· The Sweet Spot Morphing Channel Strip effect can be used
only for either analog input channels or digital input channels.
You can select analog or digital input channels on the Setup
window (page 41) or Yamaha Steinberg FW Driver window
(page 30).
7 DRIVE knob (MR816 CSX only)
Equivalent to the DRIVE knob (page 29) in the Sweet Spot
Morphing Channel Strip window.
8 MORPH knob (MR816 CSX only)
Equivalent to the MORPH knob (page 28) in the Sweet
Spot Morphing Channel Strip window.
9 Effect insertion (MR816 CSX only)
Selects the destination sound to which the Sweet Spot
Morphing Channel Strip effect is applied. Click this to call
up the pop-up menu then select the desired setting.
The Sweet Spot Morphing Channel Strip effect is
not applied, neither to the sound output from the
OFF
output jacks of the MR816 CSX nor the sound
transferred/recorded to the computer (DAW).
The Sweet Spot Morphing Channel Strip effect is
applied only to the audio signal transferred to the
output jacks (for monitoring). This effect is not
applied to the audio signal transferred/recorded
to a computer (DAW). Select this menu when you
want to record the audio signal "dry" without
effect to a track of Cubase but monitor the sound
MON.FX
with the effect applied.
Input channel
Input
COMP
signal
The Sweet Spot Morphing Channel Strip effect is
applied to both the sound which will be output from
the output jacks of the MR816 CSX and the sound
transferred/recorded to the computer (DAW).
INS.FX
Input channel
Input
COMP
signal
) REV-X Send Level
Adjusts the level of the input channel signal sent to the
REV-X (i.e., determines how much reverb will be applied).
Note that the REV-X setting is applied to the signal to
which the mute, volume and pan settings of the input
channel are already applied. The settings are available
only for the output channel for which the REV-X SEND icon
(at the Master/Headphone section) is turned on.
Regarding the signal (indicated as a computer icon) com-
ing from the DAW, the settings of this parameter are avail-
able for all the output channels.
NOTE
· The Return Level from the REV-X can be adjusted for each out-
put channel. For details, refer to page 39.
! Pan/Balance
When the channel link (1) is set to off, this control deter-
mines the stereo position of the mono input channel.
Rotate the knob clockwise to pan the signal right, and
counter-clockwise to pan left.
When the channel link (1) is set to on, this control deter-
mines the volume balance between the left and right ste-
reo channels. Odd channel signals are fed to the L bus,
and even channel signals are fed to the R bus.
@ Mute
Turns mute on/off for each channel.
NOTE
· You can turn a specific input channel's mute on/off for all the
output channels simultaneously by clicking the mute (
icon of the desired input channel while holding the [Alt] key or
[option] key on the computer keyboard.
MR Editor
To a
computer
To the output
EQ
jack
To a
computer
To the output
EQ
jack
)
37
Operation Manual