Dedicated Windows For The Mr816 Csx/Mr816 X In Cubase; Mr816 Csx/Mr816 X Input Settings Window; How To Call Up The Window - Steinberg MR816CSX Operation Manual

Dedicated windows for the MR816 CSX/
MR816 X in Cubase
If both "TOOLS for MR" and Cubase have been installed to your computer, dedicated windows for the Link functions between
the MR816 CSX/MR816 X and Cubase are available in Cubase, as described here.

MR816 CSX/MR816 X Input Settings window

This window lets you make various settings for the internal mixer of the MR816 CSX/MR816 X. From this window, you can set
almost all the parameters related to the input channels of the MR816 CSX/MR816 X, such as phase, high pass filter on/off,
Channel Strip, and REV-X.

■ How to call up the window

Follow the instructions below.
For Cubase 4.5.1 or later
1
Select [Devices] ➝ [Mixer] to call up the Mixer
window.
2
Click the arrow (
Mixer") to call up the Extended Mixer.
3
Click the triangular (
Type/Can Hide State") of the desired input chan-
nel then select "Hardware" from the menu.
arrow button
("Show Extended
Mixer")
triangular button
("Extended View
Type/Can Hide
State")
NOTE
· You can call up the MR816 CSX/MR816 X Input Settings win-
dow also via the following operation.
Click the Edit ( ) button ("Edit Input Channel Settings") to
call up the VST Input Channel Settings window. Right-Click any
location on the window then select [Customize View] ➝ [Hard-
ware] from the pop-up menu.
) button ("Show Extended
) button ("Extended View

Dedicated windows for the MR816 CSX/MR816 X in Cubase

For Cubase AI 4.5.1 or later
1
Click the Edit (
tings") of the desired audio channel to call up
the VST Audio Channel Settings window.
2
Right-click any location on the VST Audio Chan-
nel Settings window (Macintosh: click while
holding the Control key) then select [Customize
View] ➝ [Input Hardware] from the pop-up menu.
NOTE
· The settings made in the MR816 CSX/MR816 X Input Settings
window will be saved as a project file of Cubase. This means
that you can recall the previously-created settings as soon as
you open the Project file the next time.
· When the MR816 CSX/MR816 X is set to the external effect
mode, the parameters related to the Channel Strip and REV-X
will be set on the VST plug-in effect setup window. This means
that these parameters will not be shown on the MR816 CSX/
MR816 X Input Settings window.
) button ("Edit Channel Set-
21
Operation Manual