Setup Window - Steinberg UR 824 Operation Manual

REV-X Return Level
Adjusts the return level of the REV-X.
Range: -∞ dB – +6.00 dB
Pan
Adjusts the pan.
Range: L16 – C – R16
Mute
Turns the mute on (lit) and off (dark).
Fader
Adjusts the signal level.
Range: -∞ dB – +6.00 dB
MIX Area
This is the area for selecting the MIX you want to
configure.
MIX
Selects the MIX you want to configure.
You can copy the Main window settings of the
MIX by dragging and dropping.
Headphone Area
This is the area for selecting the output signal of the
headphone.
PHONES On/Off
Turns on (lit) and off (dark) the headphone. You
can output the MIX selected in the MIX area to the
PHONES by turning this on.
Panel Controls for the Software Programs
Level Meter Window
This is the window for indicating the level meter of all
channels on the upper part of the window. Also, this
window indicates the controls of some channels on
the lower part of the window. The function of the
controls are the same as those described in the
section "Main Window" (page 9).
Range
Indicates the displayed range of the controls on
the lower part of the window.

Setup Window

This is the window for configuring the common
settings of the device.
CONTROL PANEL
For Windows, this opens the "Control Panel of the
Audio Driver" (page 7). For Mac, this opens the
Audio MIDI Setup.
HPF
Selects the cutoff frequency of the high pass filter.
Option: 120 Hz, 100 Hz, 80 Hz, 60 Hz, 40 Hz
Operation Manual
UR824
12