Steinberg MR816CSX Operation Manual page 32

Dedicated windows for the MR816 CSX/MR816 X in Cubase
NOTE
· If audio signals that cannot be synchronized with the Word
Clock Source are sent to the MR816 CSX/MR816 X, the Word
Clock Source lamps flash. In this state, make sure to send
appropriate audio signals to the jack specified as the Word
Clock Source. Alternately, change the Word Clock Source to a
different value so that synchronization is possible.
· When the "Digital I/O, External FX" parameter is set to "S/PDIF
(opt) + S/PDIF (coax)" and the "Clock Source" (page 31)
parameter is set to "S/PDIF (opt)" or "S/PDIF (coax)," sending
audio signals that cannot be synchronized (such as different
data format or unstable sample rate) to the jack specified as
the Word Clock Source results in both the OPTICAL IN jack and
S/PDIF IN jack being unable to accept any audio signals.
· When the "Digital I/O, External FX" (page 31) parameter is set
to "External FX," the "Clock Source" (page 31) parameter can
be set to only "Internal" or "WCLK In." If the "Clock Source"
(page 31) parameter has been set to something other than
"Internal" and "WCLK In," the parameter will be automatically
set to "Internal" in that case.
3 Sweet Spot Morphing Ch. Strip
Determines the channels to which the Sweet Spot Mor-
phing Channel Strip effect is inserted.
When this is selected, the Sweet Spot
Mic/Line Input Morphing Channel Strip effect is inserted
to the analog input channels.
When this is selected, the Sweet Spot
Digital Input Morphing Channel Strip effect is inserted
to the digital input channels.
4 External FX Type (MR816 CSX only)
By setting this parameter, you can determine how the
MR816 CSX works as an external effect unit for the DAW
software. This parameter is available only when the Digital
I/O. External FX parameter (
page 31
FX", or in other words, when the MR816 CSX is set to the
External Effect mode. When using the MR816 X, this
parameter is not available since only the REV-X is built
into the MR816 X.
When this is selected, the Sweet Spot Mor-
8 x Mono phing Channel Strip effect of 8 mono channels
can be used.
When this is selected, the Sweet Spot Mor-
4 x Stereo phing Channel Strip effect of 4 stereo channels
can be used.
When this is selected, the Sweet Spot Mor-
6 x Mono +
phing Channel Strip effect of 6 mono channels
REV-X
and the REV-X effect (stereo) can be used.
When this is selected, the Sweet Spot Mor-
3 x Stereo
phing Channel Strip effect of 3 stereo channels
+ REV-X
and the REV-X effect (stereo) can be used.
5 Identify
Clicking this will flash the lamps of the Multi Function
Encoder knob on the front panel of the MR816 CSX/
MR816 X which is currently being controlled from a com-
puter. This operation lets you confirm which device is
actually controlled from a computer when two or more
devices are daisy-chain connected.
32
) is set to "External
Operation Manual
About window
This window indicates the version of the Yamaha Stein-
berg FW Driver.