Steinberg MR816CSX Operation Manual page 20

Using the MR816 CSX/MR816 X with Cubase
7
Call up the Mixer window then make sure that
the Extended Mixer window is shown.
If the Extended Mixer window is not shown, click the
arrow button ("Show Extended Mixer") to call it up.
8
Click the "Show All Inserts" button at left in the
Mixer window, then click the insertion slot of the
audio channel.
The list of the VST plug-in effects will be shown on
the insertion slot.
"Show All Inserts" button
Insertion slot
9
Select "MR816" from the indicated list then
select the desired effect.
This operation will apply the internal effect to the
audio track. For details about each value, see
below.
Channel Strip [m]: Mono Channel Strip
Channel Strip [s]: Stereo Channel Strip
REV-X Hall: REV-X with the Reverb type "Hall"
REV-X Room: REV-X with the Reverb type "Room"
REV-X Plate: REV-X with the Reverb type "Plate"
You can set the effect to the desired audio channels
with this operation.
NOTE
· The settings here, including those of the Control Panel, will be
saved as a Project file of Cubase, allowing you to automatically
recalll the settings of the external effect mode and the plug-in
effect settings the next time you open the Project.
· For information about the setting windows of each effect, refer
to "REV-X" (page 25) or "Sweet Spot Morphing Channel Strip
(MR816 CSX only)" (page 27).
10
If you exit from the external effect mode, call up
the Control Panel then select an item other than
"External FX" in the "Digital I/O, External FX"
column.
20
Operation Manual