Table of Contents
Advertisement
Managing Switch User Accounts
Configuring Password Policy Settings
The global password policy settings for the switch define the following requirements that are applied to all
user accounts:
•
Minimum password size.
•
Whether or not the password can contain the username.
•
The minimum number of uppercase characters required in a password.
•
The minimum number of uppercase characters required in a password.
•
The minimum number of base-10 digits required in a password.
•
The minimum number of non-alphanumeric characters (symbols) required in a password.
•
Password expiration.
•
The maximum number of old passwords that are saved in the password history.
•
The minimum number of days during which a user is not allowed to change their password.
Password policy settings are applied when a password is created or modified. The following subsections
describe how to configure these settings using CLI commands.
To view the current policy configuration, use the
mation about this command and those used in the configuration examples throughout this section, see the
OmniSwitch CLI Reference Guide.
Setting a Minimum Password Size
To configure a minimum password size, enter the
-> user password-size min 10
The minimum length for any passwords configured for users is now 10 characters.
Configuring the Username Password Exception
Use the
user password-policy cannot-contain-username
password that contains the username. For example:
-> user password-policy cannot-contain-username enable
Enabling this functionality prevents the user from specifying the username in the password that is config-
ured for the same user account. For example, the password for the account username of public can not
contain the word public in any part of the password. However, the username of another account is still
allowed.
OmniSwitch AOS Release 7 Switch Management Guide
Configuring Password Policy Settings
show user password-policy
user password-size min
command to block the ability to configure a
March 2011
command. For more infor-
command. For example:
page 6-11
Advertisement
Table of Contents
