Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 196

SNMP Traps Table
No. Trap Name
69 ddmTxPowerThresholdViolated
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2), high-
Warning(3), lowWarning(4), lowAlarm(5).
ddmTxOutputPower—The current Output Power of the SFP/XFP in 10s of milli-Watts (mW).
70 ddmRxPowerThresholdViolated
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2), high-
Warning(3), lowWarning(4), lowAlarm(5).
ddmRxOpticalPower—The current Received Optical Power of the SFP/XFP in 10s of milli-Watts (mW).
71 webMgtServerErrorTrap
webMgtServerError—Error code string when WebView Server is in error status. Format is 'Error Num:
{Number}. {String message}.' where {Number} is an integer representing the error code and {String message}
is the error string message.
72 multiChassisIpcVlanUp
multiChassisTrapIpcVlan—The multi-chassis IPC VLAN number.
73 multiChassisIpcVlanDown
multiChassisTrapIpcVlan—The multi-chassis IPC VLAN number.
74 multiChassisMisconfigurationFailure
multiChassisTrapFailure—Indicates multi-chassis failure.
75 multiChassisHelloIntervalConsisFail-
ure
multiChassisTrapFailure—Indicates multi-chassis failure.
page B-18
Objects Family
ifIndex port
ddmNotifica-
tionType
ddmTxOutput-
Power
ifIndex, port
ddmNotifica-
tionType
ddmRxOpti-
calPower
webMgtServerE webmgt
rror
multiChassisTra multi-chas-
pIpcVlan sis
multiChassisTra multi-chas-
pIpcVlan sis
multiChassisTra multi-chas-
pFailure sis
multiChassisTra multi-chas-
pFailure sis
OmniSwitch AOS Release 7 Switch Management Guide
Description
This trap is sent when an SFP/
XFP/SFP+ Tx output power has
crossed any threshold or reverted
from previous threshold violation
for a port represented by ifIndex.
It also provides the current real-
time value of SFP/XFP/SFP+ Tx
output power.
This trap is sent when an SFP/
XFP/SFP+ Rx optical power has
crossed any threshold or reverted
from previous threshold violation
for a port represented by ifIndex.
It also provides the current real-
time value of SFP/XFP/SFP+ Rx
optical power
This trap is sent when the Web
Management server goes into
error state after crashing twice
within a minute.
Indicates the operational status
for the multi-chassis communica-
tion VLAN is Up.
Indicates the operational status
for the multi-chassis communica-
tion VLAN is Down.
This trap is sent when there is an
MCM misconfiguration (e.g.,
inconsistent chassis ID or IPC
VLAN).
This trap is sent when there is an
MCM Hello Interval consistency
falure.
March 2011