Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 69

Managing CMM Directory Content
Scheduling a Reboot
It is possible to cause a reboot of the CMM at a future time by setting time parameters in conjunction with
the reload command, using the in or at keywords.
To schedule a reboot of the primary CMM in 3 hours and 3 minutes, you would enter:
-> reload all in 3:03
To schedule a reboot for June 30 at 8:00pm, you would enter:
-> reload all at 20:00 june 30
Note. Scheduled reboot times should be entered in military format (i.e., a twenty-four hour clock).
Cancelling a Scheduled Reboot
To cancel a scheduled reboot, use the cancel keyword. For example, to cancel the reboot set above, enter
the following:
-> reload all cancel
Checking the Status of a Scheduled Reboot
You can check the status of a reboot set for a later time by entering the following command:
-> show reload
OmniSwitch AOS Release 7 Switch Management Guide
Managing Switch Configurations - Single CMM
March 2011 page 3-13