Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 187

No. Trap Name
27 mirrorUnlikeNi
mirmonPrimarySlot—Slot of mirrored or monitored interface.
mirmonPrimaryPort—Port of mirrored or monitored interface.
mirroringSlot—Slot of mirroring interface.
mirroringPort—Port of mirroring interface.
mirMonErrorNi—The NI slot number.
mirMonError—The Error returned by the NI which failed to configure Mirroring/Monitoring.
28 slbTrapOperStatus
slbTrapInfoEntityGroup—The entity group inside SLB management.
slbTrapInfoOperStatus—The operational status of an SLB cluster or server.
slbTrapInfoClusterName—A change occurred in the operational status of an SLB entity.
slbTrapInfoServerIpAddr—The IP address of a server.
Note: This trap is not supported.
29 sessionAuthenticationTrap
sessionAccessType—The access type of the session.
sessionUserName—The user name of the user logged-in.
sessionUserIpAddress—The IP address of the user logged-in.
30 trapAbsorptionTrap
trapAbsorStamp—The time stamp of the absorbed trap.
trapAbsorTrapId—The trap identifier of the absorbed trap.
trapAbsorCounter—The number of the iterations of the absorbed trap.
trapAbsorTime—The time stamp of the last iteration.
OmniSwitch AOS Release 7 Switch Management Guide
Objects Family
mirmonPrima- pmm
rySlot
mirmonPrima-
ryPort
mirroringSlot
mirroringPort
mirMonErrorNi
slbTrapInfoEn- load
tityGroup balancing
slbTrapInfoOp-
erStatus
slbTrapInfo-
ClusterName
slbTrapInfoS-
erverIpAddr
sessionAc- session
cessType
sessionUser-
Name
sessionUserI-
pAddress
sessionAuth-
Failure
trapAbsorStamp none
trapAbsor-
TrapId
trapAbsor-
Counter
trapAbsorTime
March 2011
SNMP Traps Table
Description
The mirroring configuration is
deleted due to the swapping of
different NI board type. The Port
Mirroring session which was
active on a slot cannot continue
with the insertion of different NI
type in the same slot.
A change occurred in the opera-
tional status of the server load
balancing entity.
An authentication failure trap is
sent each time a user authentica-
tion is refused.
The absorption trap is sent when
a trap has been absorbed at least
once.
page B-9