Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 192

SNMP Traps Table
No. Trap Name
47 PimRPMappingChange
pimGroupMappingPimMode—The PIM mode used for groups in this group prefix.
pimGroupMappingPrecedence—The value for pimGroupMappingPrecedence to be used for this static RP
configuration. This allows fine control over which configuration is overridden by this static configuration
48 PimInterfaceElection
pimInterfaceAddressType—The address type of the PIM interface.
pimInterfaceAddress—The primary IP address of this router on this PIM interface.
49
pimBsrElectedBSRLostElection
pimBsrElectedBSRAddressType—The address type of the elected BSR.
pimBsrElectedBSRAddress—The unicast address of the elected BSR.
pimBsrElectedBSRPriority—The priority value for the elected BSR for this address type. Higher values for
this object indicate higher priorities (0 - 255).
50
pimBsrCandidateBSRWinElection
pim
pimBsrCandidateBSR ElectedBSR—Indicates whether the local router is the elected BSR for this zone.
page B-14
Objects Family
pimGroupMap- ipmr
pingPim-
Mode
pimGroupMap-
pingPrece-
dence
pimInter- ipmr
faceAd-
dressType
pimInter-
faceAddress
ipmr
pimBsrElected
BSRAddress
Type,
pimBsrElected
BSRAddress,
pimBsrElected
pimBsrCandi- ipmr
dateBSRElect-
edBSR
OmniSwitch AOS Release 7 Switch Management Guide
Description
This trap is sent when a change is
detected to the active RP map-
ping on the device.
The notification is generated
whenever the PIM RP Mapping
Change Count is incremented,
subject to the rate limit specified
by PIM RP Mapping Change
Notification Period
This trap is sent when a new DR
or DR has been elected on a net-
work.
The notification is generated
whenever the counter PIM Inter-
face Elections Win Count is
incremented, subject to the rate
limit specified by PIM Interface
Election Notification Period.
This trap is sent when the current
E-BSR loses an election to a new
Candidate-BSR.
This trap is sent when a C-BSR
wins a BSR Election.
March 2011