Table of Contents
Advertisement
Managing CMM Directory Content
Show Currently Used Configuration
In a chassis with a redundant CMMs, the display for the currently running configuration tells the user if
the primary and secondary CMMs are synchronized.
To check the directory from where the switch is currently running and if the primary and secondary
CMMs are synchronized, enter the following command on a stack:
-> show running-directory
CONFIGURATION STATUS
Running CMM
CMM Mode
Current CMM Slot
Running configuration
Certify/Restore Status
SYNCHRONIZATION STATUS
Flash Between CMMs
Running Configuration
The
show running-directory
OmniSwitch AOS Release 7 Switch Management Guide
: PRIMARY,
: DUAL CMMs,
: 1,
: WORKING,
: CERTIFY NEEDED
: SYNCHRONIZED,
: NOT AVAILABLE,
command is described in detail in the OmniSwitch CLI Reference Guide.
March 2011
Managing CMM Redundancy
page 3-21
Advertisement
Table of Contents
