Table of Contents
Advertisement
Working With Configuration Files
For more information about these displays, refer to the OmniSwitch CLI Reference Guide.
5
Use the show ip helper command to verify that the DHCP Relay parameters defined in the configura-
tion files were actually implemented on the switch. The display is similar to the one shown here:
-> show ip helper
Ip helper :
Forward Delay(seconds)
Max number of hops
Relay Agent Information
PXE support
Forward option
Bootup Option
Forwarding address list (Standard mode):
192.168.10.10
These results confirm that the commands specified in the file dhcp_relay.txt configuration file were
successfully applied to the switch.
OmniSwitch AOS Release 7 Switch Management Guide
Tutorial for Creating a Configuration File
= 15,
= 3,
= Disabled,
= Disabled,
= standard mode,
= Disable
March 2011
page 5-3
Advertisement
Table of Contents
