Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 62

CMM Files
Scenario 2: Running Configuration Saved to the Working Directory
The network administrator recreates Switch X's RUNNING CONFIGURATION and immediately saves
the running configuration to the working directory.
In another mishap, the power to the switch is again interrupted. The switch reboots rolls back to the certi-
fied directory. However, since the configuration file was saved to the working directory, that configura-
tion can be retrieved.
This is illustrated in the diagram below:
R W C
1. Switch boots
from certified
directory.
page 3-6
R W C
2. Changes are
made to the run-
ning configura-
tion and saved to
working directory.
Running Configuration Saved to Working Directory
OmniSwitch AOS Release 7 Switch Management Guide
Managing CMM Directory Content
R W C
3. Power is inter-
rupted and the
switch goes down,
rebooting from
certified directory.
R W C
4. Switch can be
rebooted from the
working directory
restoring the con-
figuration.
March 2011