Table of Contents
Advertisement
Managing CMM Directory Content
Scenario 3: Synchronizing CMMs
When changes have been saved to the primary CMM certified directory, these changes need to be propa-
gated to the secondary CMM using the
The following diagram illustrates the process that occurs when synchronizing CMMs.
The copy flash-synchro command (described in
page
3-19) can be issued on its own, or in conjunction with the
(described in
"Synchronizing the Primary and Secondary CMMs" on page
Note. It is important to certify the CMMs as soon as the validity of the software is established. Unsynchro-
nized CMMs are at risk of mismanaging data traffic due to incompatibilities in different versions of switch
software.
OmniSwitch AOS Release 7 Switch Management Guide
copy flash-synchro
CMM A
R
C
1. A copy flash-
synchro com-
mand is issued on
the primary
CMM
and the
running-configu-
ration is copied to
the certified direc-
tory.
Synchronizing CMMs
"Synchronizing the Primary and Secondary CMMs" on
command.
CMM B
R
C
2. Additionally,
the running-con-
figuration is cop-
ied to the certified
directory on the
secondary CMM.
copy running certified
3-19).
March 2011
CMM Files
command
page 3-11
Advertisement
Table of Contents
