Table of Contents
Advertisement
Working With Configuration Files
Creating Snapshot Configuration Files
You can generate a list of configurations currently running on the switch by using the
snapshot
command. A snapshot is a text file that lists commands issued to the switch during the current
login session.
Note. A user must have read and write permission for the configuration family of commands to generate a
snapshot file for those commands. See the "Switch Security" chapter of this manual for further informa-
tion on permissions to specific command families.
Snapshot Feature List
You can specify the snapshot file so that it will capture the CLI commands for one or more switch features
or for all network features. To generate a snapshot file for all network features, use the following syntax:
-> configuration snapshot all
To generate a snapshot file for specific features, select the appropriate syntax from the following list.
Snapshot Keywords
WEBMGT
VRRP
VLAN
VFC
UDLD
SYSTEM
STP
STACK-MANAGER
SNMP
SLB
SESSION
RIPNG
RIP
BRIDGE
You may enter more than one network feature in the command line. Separate each feature with a space
(and no comma). The following command will generate a snapshot file listing current configurations for
the vlan, qos, and snmp command families.
-> configuration snapshot vlan qos snmp
OmniSwitch AOS Release 7 Switch Management Guide
QOS
PORT-MAPPING
POLICY
PMM
OSPF3
OSPF
NTP
NETSEC
MULTI-CHASSIS
MODULE
LLDP
LINKAGG
BGP
IPV6
March 2011
Creating Snapshot Configuration Files
configuration
IPSEC
IPMS
IPMR
IP-ROUTING
IP-HELPER
IP
INTERFACE
HEALTH
ERP
CHASSIS
CAPABILITY
BFD
AAA
ALL
page 5-9
Advertisement
Table of Contents
