Table of Contents
Advertisement
Login Specifications
For more information about...
Using WebView to manage the switch
Using SNMP to manage the switch
Login Specifications
Platforms Supported
Login Methods
Number of concurrent Telnet sessions
Number of concurrent SSH sessions
Number of concurrent HTTP (WebView) sessions 4
Secure Shell public key authentication
Login Defaults
Access to managing the switch is always available for the admin user through the console port, even if
management access to the console port is disabled.
Parameter Description
Session login attempts allowed
before the TCP connection is
closed.
Time-out period allowed for
session login before the TCP
connection is closed.
Inactivity time-out period. The
length of time the switch can
remain idle during a login
session before the switch will
close the session.
page 1-2
See...
Chapter 8, "Using WebView"
Chapter 9, "Using SNMP"
OmniSwitch 10K
Telnet, SSH, HTTP, SNMP
4
8
Password
DSA/RSA Public Key
Command
session login-attempt
session login-timeout
session timeout
OmniSwitch AOS Release 7 Switch Management Guide
Logging Into the Switch
Default
3 attempts
55 seconds
4 minutes
March 2011
Advertisement
Table of Contents
