Table of Contents
Advertisement
Verifying CLI Usage
Verifying CLI Usage
To display information about CLI commands and the configuration status of your switch, use the show
commands listed here:
show session config
show prefix
history
telnet
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide. Additional information can also be found in
page 4-10
Displays session manager configuration information (e.g., default
prompt, banner file name, and inactivity timer).
Shows the command prefix (if any) currently stored by the CLI. Prefixes
are stored for command families that support the prefix recognition fea-
ture.
Displays commands you have recently issued to the switch. The com-
mands are displayed in a numbered list.
Shows the enable status of the more mode along with the number of
lines specified for the screen display.
"Using "Show" Commands" on page
OmniSwitch AOS Release 7 Switch Management Guide
Using the CLI
4-4.
March 2011
Advertisement
Table of Contents
