Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 190

Switch management guide
Hide thumbs Also See for OmniSwitch AOS Release 7:
Table of Contents

Advertisement

SNMP Traps Table
No. Trap Name
42
chassisTrapsPossibleDuplicateMac
physicalIndex—The Physical index of the involved object.
baseMacAddress—The base MAC Address.
43
lldpRemTablesChange
lldptatsRemTablesInserts—The number of times the complete set of information advertised by a particular
MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpExtensions objects.
lldptatsRemTablesDeletes—The number of times the complete set of information advertised by a particular
MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects
lldptatsRemTablesDrops—The number of times the complete set of information advertised by a particular
MSAP could not be entered into tables contained in lldpRemoteSystemsData and lldpExtensions objects
because of insufficient resources
lldptatsRemTablesAgeouts—The number of times the complete set of information advertised by a particular
MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because
the information timeliness interval has expired.
44
pimNeighborLoss
pimNeighborUpTime—The time since this PIM neighbor (last) became a neighbor of the local router.
page B-12
Objects
Family
physicalIndex
chassis
baseMacAd-
dress
lldptatsRemTa-
aip
blesInserts
lldptatsRemTa-
blesDeletes
lldptatsRemTa-
blesDrops
lldptatsRemTa-
blesAgeouts
pimNeigh-
ipmr
borUpTime
OmniSwitch AOS Release 7 Switch Management Guide
Description
This trap is sent when there is a
possiblity of duplicate a MAC
address in the network.
This trap is sent when the value
ofthe LLDP Stats Rem Table
Last ChangeTime changes. It
can be utilized by an NMS to
trigger LLDP remote systems
table maintenance polls.
This trap is sent when an adja-
cency with a neighbor is lost.
The notification is generated
when the neighbor timer expires,
and the router has no other neigh-
bors on the same interface with
the same IP version and a lower
IP address than itself.
The notification is generated
whenever the PIM NeighborLoss
Count is incremented, subject to
the rate limit specified by the
PIM Neighbor Loss Notification-
Period.
March 2011

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch aos 7

Table of Contents