Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 188

SNMP Traps Table
No. Trap Name
31 alaDoSTrap
alaDoSType—Index field for the alaDoSTable. Integer indicating the DoS Type: 0=portscan, 1=tcpsyn,
2=pingofdeath, 3=smurf, 3=pepsi, 5=land and 6=teardropBonkBoink.
alaDoSDetected—Number of attacks detected
pethMainPseConsumptionPower—Measured usage power expressed in Watts.
Note: This trap is not supported on OmniSwitch 6400, 6800, 6850, and 6855 switches.
32 ospfNbrStateChange
ospfRouterId—A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to
ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
ospfNbrIpAddr—The IP address this neighbor is using in its IP Source Address. Note that, on address-less
links, this will not be 0.0.0.0, but the address of another of the neighbor's interfaces.
ospfNbrAddressLessIndex—On an interface having an IP Address, zero. On address-less interfaces, the cor-
responding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the
instance.
ospfNbrRtrId—A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router
in the Autonomous System.
ospfNbrState—The State of the relationship with this Neighbor.
33 ospfVirtNbrStateChange
ospfRouterId—A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to
ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
ospfVirtNbrArea—The Transit Area Identifier.
ospfVirtNbrRtrId—A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
ospfVirtNbrState—The state of the Virtual Neighbor Relationship.
34 lnkaggAggUp
traplnkaggId—Index value of the Link Aggregate group.
traplnkaggIfIndex—Port of the Link Aggregate group.
35 lnkaggAggDown
page B-10
Objects Family
alaDoSType ip
alaDoSDetected
ospfRouterId ospf
ospfNbrIpAddr
ospfNbrAd-
dressLessIn-
dex
ospfNbrRtrId
ospfNbrState
ospfRouterId ospf
ospfVirtN-
brArea
ospfVirtN-
brRtrId
ospfVirtN-
brState
traplnkaggId linkaggre-
traplnkaggPor- gation
tIfIndex
traplnkaggId linkaggre-
traplnkaggPor- gation
tIfIndex
OmniSwitch AOS Release 7 Switch Management Guide
Description
Indicates that the sending agent
has received a Denial of Service
(DoS) attack.
Indicates a state change of the
neighbor relationship.
Indicates a state change of the
virtual neighbor relationship.
Indicates the link aggregate is
active. This trap is sent when any
one port of the link aggregate
group goes into the attached
state.
Indicates the link aggregate is not
active. This trap is sent when all
ports of the link aggregate group
are no longer in the attached
state.
March 2011