Working With Configuration Files
! OSPF :
! BGP :
! IP multicast :
! IPv6 :
! RIPng :
! Health monitor :
! Interface :
! Link Aggregate :
! VLAN AGG:
! 802.1Q :
! Spanning tree :
bridge mode 1x1
! Bridging :
source-learning chassis hardware
! Bridging :
! Port mirroring :
! UDP Relay :
! Server load balance :
! System service :
! VRRP :
! Web :
! Module :
! NTP :
! RDP :
This file shows configuration settings for the Chassis, IP, AAA, SNMP, IP route manager, Spanning tree,
and Bridging services. Each of these services have configuration commands listed under their heading. All
other switch services and applications are either not being using or are using default settings.
OmniSwitch AOS Release 7 Switch Management Guide
Creating Snapshot Configuration Files
March 2011
page 5-11