Alcatel-Lucent OmniSwitch AOS Release 7 Manual page 184

Switch management guide
Hide thumbs Also See for OmniSwitch AOS Release 7:
Table of Contents

Advertisement

SNMP Traps Table
No. Trap Name
18
esmDrvTrapDropsLink
esmPortSlot—The physical slot number for this Ethernet Port. The slot number has been added to be used by
the private trap.
esmPortIF—The on-board interface number for this Ethernet port. The port number has been added to be used
by the private trap.
ifInErrors—For packet-oriented interfaces, the number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained errors preventing them from being deliverable to a higher-
layer protocol. Discontinuities in the value of this counter caifIndexn occur at re-initialization of the manage-
ment system and at other times as indicated by the value of ifCounterDiscontinuityTime.
ifOutErrors—For packet-oriented interfaces, the number of outbound packets that could not be transmitted
because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units
that could not be transmitted because of errors. Discontinuities in the value of this counter can occur at re-ini-
tialization of the management system and at other times as indicated by the value of ifCounterDiscontinuity-
Time.
esmDrvTrapDrops— Partitioned port (separated due to errors).
19
portViolationTrap
ifIndex—A unique value, greater than zero, for the interface.
portViolationSource—The source of the port violation. The source is the feature or module that has caused the
violation - 1. Source Learning, 2. QOS Policy, 3. Net Sec, 4. UDLD, 5. NI Supervison (Fabric Stability). When
there is no value the value is "0".
portViolationReason—The reason for the port violation. It is application specific, and indicates first Violation
that happened on this port - 1. pvSLLpsShutDown, 2. pvSLLpsRestrict, 3. pvQosPolicy, 4. pvQosSpoofed, 5.
pvQosBpdu, 6. pvQosBgp, 7. pvQosOspf, 8. pvQosRip, 9. pvQosVrrp, 10. pvQosDhcp, 11. pvQosPim, 12.
pvQosDvmrp, 13. pvQosIsis, 14. pvQosDnsReply, 15. pvUdld.
20
dvmrpNeighborLoss
dvmrpInterfaceLocalAddress—The IP address this system will use as a source address on this interface. On
unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress for some interfaces on the
system.
dvmrpNeighborState—State of the neighbor adjacency.
page B-6
Objects
Family
esmPortSlot
interface
esmPortIF
ifInErrors
ifOutErrors
esmDrvTrap-
Drops
port
ifIndex,
portViolation
Source,
portViolation
Reason
dvmrpInterface-
ipmr
LocalAddress
dvmrpNeigh-
borState
OmniSwitch AOS Release 7 Switch Management Guide
Description
This trap is sent when the Ether-
net code drops the link because
of excessive errors.
This trap is sent when a port vio-
lation occurs. The trap will indi-
cate the source of the violation
and the reason for the violation
A 2-way adjacency relationship
with a neighbor has been lost.
This trap is generated when the
neighbor state changes from
"active" to "one-way," "ignor-
ing" or "down." The trap is sent
only when the switch has no
other neighbors on the same
interface with a lower IP address
than itself.
March 2011

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch aos 7

Table of Contents