Starting The System; Starting Operating System Setup - Intergraph InterServe 9000 System Reference Manual

26
The Windows NT delivery media contain software and drivers for both Reduced Instruction
Set Computing (RISC)- and Intel-based systems. When installing Windows NT distribution
files, make sure you install them from the \
delivery media. For example, if you are installing a device driver from the Windows NT
CD-ROM, key in the following when prompted for the path:
drive:\i386
where drive is the drive letter for the CD-ROM drive.

Starting the System

The power button is behind the locked door. To start the system, unlock and open the front
door and press the power button on the front of the system. If you have an AC distribution
box connected to the system, make sure its power switch is turned on before you start the
system.

Starting Operating System Setup

When you start your system for the first time, you must configure the operating system
software for use. After you first start the system, the Microsoft End User License Agreement
(EULA) screen displays.
NOTE Before starting the system for the first time, you may want to learn more about system power,
startup, and shutdown. See Chapter 4, "Operating Notes," for this information.
To start the computer and set up the operating system software:
1. Turn on the monitor by pressing its power switch.
2. Press the power button on the front of the system. The system starts and the EULA
screen displays on the monitor.
3. Read the terms of the EULA and then follow the instructions displayed on-screen to
complete the Setup process. A Welcome screen displays, then a prompt for user and
organization, and then a prompt for the product ID. Accept the default settings provided
by Setup, except as follows:
Setup asks if you want to install networking. If you choose to install networking
(default), choose "Select from list..." when prompted whether to allow Setup to
detect the network adapter. From the list, select "3Com Fast Etherlink XL Adapter
(3C905)." Allow Setup to install this driver software.
386 directory (the Intel software directory) on the
I