Prepare For Windows Nt Setup; Starting The System - Intergraph InterServe 600 Series System Setup

8
The Windows NT delivery media contain software and drivers for both Reduced Instruction
Set Computing (RISC)- and Intel-based systems. When installing Windows NT distribution
files, make sure to install them from the \
delivery media. For example, if you are installing a device driver from the Windows NT
CD-ROM, key in the following when asked for the path to the file, where drive is the drive
letter for the CD-ROM drive:
drive:\i386

Starting the System

Before you turn on power to the system, be sure you have reviewed "Prepare for Windows NT
Setup". To start the system, press the power switch located on the front of the system, as
shown in the following figure.
The system displays the Windows NT Setup screen, as described below.
386 directory (the Intel software directory) on the
I
Power Switch