Finishing Operating System Setup; Creating An Emergency Repair Disk - Intergraph InterServe 9000 System Reference Manual

Create an Emergency Repair Disk when prompted.
Enter a password for the Administrator account when prompted.
After you configure networking, you can join a workgroup or domain. You cannot set up a
user account until after you have completed setup and rebooted the system. See Windows
NT Help for details on setting up a user account and joining a workgroup or domain.

Finishing Operating System Setup

After operating system Setup is completed, a "Press to finish setup" icon displays on the
operating system desktop. Double-click this icon, or select Programs/InterSite/Welcome
from the operating system Start menu, to display InterSite Welcome.
InterSite Welcome helps you do the following:
u
Create a repair disk for the operating system.
u
Create backup diskettes of device driver software and other system software products.
u
Get the latest driver and other system software from the World Wide Web.
u
Display an online System Introduction for your system.
u
Learn about Intergraph Computer Systems customer support.
You should take advantage of the tools provided by InterSite Welcome to ensure that your
system is fully ready for use. See InterSite Welcome for more information. Also see the
following sections for information on creating an Emergency Repair Disk and creating
backup diskettes.

Creating an Emergency Repair Disk

If you did not create an Emergency Repair Disk during Setup, use the tools provided by
InterSite Welcome to do so. See the operating system documentation and Help for
information on creating an Emergency Repair Disk. You should also update an Emergency
Repair Disk after you finish configuring the system.
In the event of corrupted disk drives, the files on the repair diskettes restore the contents of
the operating system registry at the time the operating system was installed, along with the
standard operating system drivers.
27