Before You Begin - Intergraph InterServe 9000 System Reference Manual

2

Before You Begin

Read this chapter before you attempt to set up an InterServe 9000. In addition:
u
Contact the local Intergraph support office if any items you ordered are missing or
damaged.
u
If you use non-Intergraph cables with the system, ensure that they are shielded and
terminated on both ends. Intergraph-supplied cables are shielded to prevent excessive
electromagnetic interference (EMI).
u
If using an external power source with your system, such as an AC distribution box or
an uninterruptible power supply (UPS), review the documentation delivered with the
power source for information about its capabilities.
u
If you need to return equipment for repair, you must ship it in Intergraph-supplied
packaging to get warranty service.
u
Follow the installation instructions carefully to avoid personal injury and damage to the
system hardware.
If you are installing the system into a rack, note the following.
u
Set up the Intergraph rack using the Intergraph Rack Installation and Use document
delivered with the rack. Become familiar with the rack enclosure before installing the
system hardware into it.
u
Do not push on or lean against the rack.
u
The rack's front and side stabilizer feet must be extended at all times.