Installing Mylex Raid Software - Intergraph InterServe 9000 System Reference Manual

To restart the system in VGA mode:
1. Power down and restart the system.
2. At the boot screen, select the VGA mode option.
After logging on to Windows NT in VGA mode, check for the following common
configuration problems and solutions:
u
A multi-sync monitor is selected, but a graphics display device with different video
timings (such as an Intergraph InterVue monitor) is connected to the system. Select the
appropriate monitor type as described previously.
u
The monitor selection is inappropriate for the monitor connected to the system. Select a
new monitor.
u
There is not enough video display memory to support the selected graphics resolution
and color depth. Install and reconfigure the video display to use a lower resolution and
color depth.
Restart the system and, when the boot screen displays, select the appropriate non-VGA
Windows NT Server to use the reconfigured video display driver. If problems persist,
contact the Intergraph Customer Response Center at 1-800-633-7248 for help.

Installing Mylex RAID Software

Mylex RAID software is installed at the factory on RAID systems. If you have to reinstall
the operating system and associated system software, you must reinstall the Mylex RAID
software after configuring the operating system. Install the software from the backup
diskette supplied with the system, or from the backup diskette you created using Version
Manager. Refer to Version Manager Help for more information about using Version
Manager.
NOTE The
MYLEXPCIDRV
software. See the
of these utilities.
To install Mylex software:
1. Log on to Windows NT using an administrative account.
2. Insert the diskette containing the Mylex RAID software in the system's floppy disk
drive.
3. Run
SETUP
4. Respond yes or no appropriately to the questions about Windows NT. At the Welcome
dialog, select Next. The Mylex Install Destination Path dialog displays.
product contains some administrative utilities for use with the Mylex
. in the product directory for instructions on installation and use
README TXT
. on the diskette.
EXE
31