Printer Setup Options - Fiery EX12 Configuration Manual

4
4-42 Performing Setup from the Control Panel
T
O ACCESS PRINTER SETUP OPTIONS
1. In the main Setup menu, choose Printer Setup.
Exit Setup
Server Setup
Network Setup 2. Enter the options appropriate to the printing requirements at the site.
Printer Setup
Setup
3. When you have finished, save changes.

Printer Setup options

Printer Setup configures the connections and printing behavior associated with a
particular printing device. For more information on Fiery print connections,
see page 3-1.
In the list of options that follows, default values, where applicable, appear in brackets.
For users to use the Fiery utilities and Fiery WebTools or print to the Fiery over
N :
OTE
a TCP/IP network, you must publish at least the Hold queue or the Print queue.
Publish Direct Connection
Yes/No [Yes]
This option allows users to print (or download) jobs to the Fiery without spooling.
Jobs printed to the Direct connection are not saved in the Printed queue.
If you plan to download fonts to the Fiery, you must publish the Direct connection.
Publish Print Queue
Yes/No [Yes]
This option allows users to print (or download) jobs to the Print queue. Jobs that are
printed to the Print queue are spooled to the Fiery disk and printed on a first-in,
first-out basis. Only queues published in the Printer Setup are available to users.
Publish Hold Queue
Yes/No [Yes]
Use this option to allow users to print (or download) jobs to the Hold queue. Jobs in
the Hold queue can only be printed by copying or moving the jobs to the Print queue
with the job management tools.