Setting Up Printing Groups - Fiery EX12 Configuration Manual

5
5-48 Setting up the Fiery from a Windows Computer
Output Profile (local Setup only)
Additional profiles can be created and downloaded to the Fiery with ColorWise Pro
Tools.
Pure Black Text/Graphics (local Setup only)
and line art. This option also minimizes toner use for documents containing both
color and black-only pages.
When this option is on, black text and line art are printed with black toner only.
When this option is off, black text and line art are printed using all four colors of toner.
Black Overprint (local Setup only)
colored backgrounds. With this option is off, black text knocks out color backgrounds.
In general, this option should be on.
Spot Color Matching (local Setup only)
internal lookup table to print the best equivalents of PANTONE colors. When this
option is off, PANTONE colors are printed using the CMYK values defined in the
originating applications.

Setting up printing groups

The Fiery administrator can arrange users into groups and allow members of a group
to print only if they supply a password at print time. This method of printing is known
as Printing Groups, or Member Printing.
This section describes how to set up groups and passwords. For information about how
to enable Printing Groups, see
Printing Groups feature, see the
Printing Groups is not supported with Windows 2000/XP.
N :
OTE
To change the Group Name or Group Password settings for a job that a user has
N :
OTE
already sent from the printer driver, use Command WorkStation. Making these
changes with Fiery Spooler or Fiery WebSpooler has no effect.
—Specify the output profile to use for printing.
—Specify whether to optimize black text
—When this option is on, black text overprints on
—When this option is on, the Fiery uses an
page 4-13. For more information about using the
Job Management Guide.