7
7-12 Administering the Fiery
If you press a button, the following options appear.
Choose
Exit Setup
Server Setup
Network Setup
Printer Setup
PS Setup
Color Setup
Job Log Setup
Change Password
Restarting the Fiery
Use the following procedure to restart the Fiery, rather than using the power switch on
the back of the Fiery.
T
F
O RESTART THE
IERY
1. Make sure the Fiery is not receiving, processing, or printing a job.
Make sure the status message on the Control Panel reads Idle.
2. Press the Menu button to display the Functions menu.
3. Use the Down arrow button to scroll to the last screen, and choose Shut Down.
4. Use the line selection button to choose Restart Server.
To do this
Exit the Setup menus; the Fiery reboots.
Enter the Server Setup menus.
Enter the Network Setup menus.
Enter the Printer Setup menus.
Enter the PostScript Setup menu.
Enter the Color Setup menu.
Enter the Job Log Setup menu.
Change the Administrator password.