Functions Menu - Fiery EX12 Configuration Manual

4
4-6 Performing Setup from the Control Panel
Print Pages
Scan Job
EX12

Functions menu

The Functions menu provides many of the options available from
Command WorkStation. Choose the following commands from this menu:
Print special pages from the Fiery. You can print the following pages from the
submenu that appears:
—A Test Page allows you to confirm that the Fiery is properly connected
Test Page
to the copier, and provides color and grayscale samples to troubleshoot problems
with the copier or the Fiery. The following settings are among those listed on the
Test Page: Server Name, Printer Model, color settings, calibration information,
date and time the Test Page was printed.
Configuration —Prints the Configuration page, which gives the current server and
device configuration. This page lists general information about the hardware and
software configuration of the Fiery, the current options for all Setup settings,
information about the current calibration, and the Ethernet and Token Ring
addresses of the Fiery.
—Prints a log of the last 55 jobs. For information on the fields in the Job
Job Log
Log and on printing it in other forms, see the
Control Panel Map— Prints the Control Panel Map, which is an overview of the
screens you can access from the Control Panel.
Color Charts —Prints samples of the RGB, CMY, and PANTONE colors available
from the Fiery.
—Prints a list of all fonts currently on the Fiery hard disk.
Font List
Scan a document placed on the copier's glass or the document feeder. For more
information on using this function, see the
Job Management Guide.
Printing Guide.