Fiery EX12 Configuration Manual page 61

4
4-7 Fiery Control Panel
Suspend Printing
Resume Printing
Shut Down
Clear Server
Run Setup
Run Diagnostics
EX12
Tray Alignment
EX2000d
Suspend communication between the Fiery and the copier. You must suspend
printing if you want to interrupt the current Fiery job and use the copier to make
copies or print another job first. Jobs continue to process on the Fiery. After you
make the copies, select Resume Printing to continue printing jobs from the Fiery.
Resume communication between the copier and the Fiery after you have finished
making copies or printing other jobs.
Shut down all Fiery activity in the correct manner and then restart. Use this
option instead of the power switch on the back of the Fiery. The following
options are available from the submenu that appears:
—Restarts the server without shutting down the Fiery hard disk.
Restart Server
Shut Down System —Shuts down the Fiery hard disk.
—Restarts the system after shutting down the Fiery hard disk.
Reboot System
Clear all jobs in all server queues, as well as all jobs archived on the Fiery hard disk,
the index of archived jobs (in the Archive window), all FreeForm masters, and the
index of FreeForm masters (in the FreeForm window). Check with your
administrator or operator before choosing Clear Server. If an Administrator password
has been set, you must enter it to access Clear Server.
Enter the Setup menu and change Setup option settings.
This function is provided for service representatives only. For information about
running diagnostics, contact your authorized service/support technician.
Use this option to adjust the placement of text and images on the page so that
they are correctly aligned on the sheet of paper and both sides of a duplex sheet
have the exact same alignment. For more information on this function, see the
Management Guide.
Job