Exiting Setup; Printing The Configuration Page - Fiery EX12 Configuration Manual

5
5-50 Setting up the Fiery from a Windows Computer

Exiting Setup

When you have finished specifying Setup options, click OK and close the Setup dialog
box. You are notified that the Fiery must be restarted for the new settings to take effect.
You can restart now or later. If Command WorkStation is running, the connection to
the Fiery is lost and you must log in again when the server has restarted.
If you changed the network configuration or other settings affecting Windows NT
Workstation, you must restart Windows NT 4.0 for those changes to take effect.
After you have completed Setup and restarted the Fiery for the first time, install the
user software for printing on remote workstations, as described in the
Installation Guide. To confirm the network connection and your Setup, print a test job
from a remote workstation.
Printing the Configuration page
The Configuration page lists the settings in effect for the current Setup. After you have
performed Setup, print a Configuration page to confirm your settings.
The other pages you can print from Command WorkStation include the test page, Job
Log, color charts, and Font List. For information on these Fiery pages, see the
Management
T C
O PRINT THE ONFIGURATION PAGE
1. In Command WorkStation, choose Print Pages from the File menu.
2. Click Configuration.
3. Click Print.
Post the current Configuration page near the server for quick reference. Users need the
information on this page, such as the current printer default settings.
Guide.
User Software
Job